RangeEasy - DIY Friendly
Gas Burner Won't Light
Gas burner clicks but won't ignite, or doesn't click at all.
Safety Warnings
- If you smell gas, do not attempt to light burners
- Open windows and leave the area if gas smell is strong
- Call gas company if you suspect a leak
Arizona Climate Note
Desert dust accumulates in burner ports quickly. Clean monthly during dusty season.
Common Symptoms
- Clicking sound but no flame
- No clicking at all
- Weak or yellow flame
- Only some burners affected
Possible Causes
high likelihoodWet igniter from cleaning or spills
DIYhigh likelihoodDirty burner ports
DIYmedium likelihoodBurner cap misaligned
DIYmedium likelihoodIgniter failure
Prolow likelihoodSpark module failure
Prolow likelihoodGas supply issue
ProDIY Troubleshooting Steps
- 1
Allow wet igniter to dry completely (24 hours)
- 2
Clean burner ports with a pin or needle
- 3
Ensure burner cap is properly seated and level
- 4
Clean igniter electrode gently with soft brush
- 5
Check if other gas appliances work (isolate supply issue)
- 6
Verify gas shut-off valve is fully open
When to Call a Professional
- All burners fail to ignite
- You smell gas without ignition
- Igniter glows but gas doesn't light
- Clicking continues after flame established
Prevention Tips
- Clean burners regularly
- Wipe spills immediately
- Don't let water pool around igniters
- Use proper burner caps for each position
Need Expert Diagnosis?
Our technicians can quickly diagnose and repair range problems. Same-day service available.